A508-3钢临界温度A_(C1)的电镜测定  

Determination of Critical Temperature A_(C1) of A508-3 Steel by TEM Technique

作　　者：盛钟琦[1] 肖洪[1] 邹岷[1] 

机构地区：[1]中国核动力研究设计院

出　　处：《大型铸锻件》1996年第2期26-28,共3页Heavy Casting and Forging

摘　　要：利用透射电镜技术测定了 A5 0 8- 3钢的临界温度 AC1,测定结果比膨胀仪法的结果低 2 5℃左右。原因是电镜技术可以发现极微小区域中发生的相变以及它更接近于平衡状态。最后还结合热处理实际讨论了该结果在质量保证中的作用。The Critical temperature A C1 of A508-3 Steel was measured by means of TEM (transmission electron microscopy)technique.Results showed that it was about 25℃ lower than the measured value determined by dilatometric test.The cause was that TEM technique can detect phase transformation,which took place in very small area,and it was more approximate to the equilibrium state.Moreover,combined with practice of heat treatment,the application of the experimental results in quality assurance was discussed.

关 键 词：A508-3钢 临界温度 电子显微镜 

分 类 号：TG142.15[一般工业技术—材料科学与工程] TG115.215[金属学及工艺—金属材料]