混合电容器多孔氧化钌阴极涂层的制备与表征  

Preparation and characterization of porous ruthenium oxide coatings as cathode material of hybrid capacitor

作　　者：何捍卫[1] 欧定斌[2] 刘红江[1] 甘卫平[2] 周科朝[1] 

机构地区：[1]中南大学粉末冶金国家重点实验室,长沙410083 [2]中南大学材料科学与工程学院,长沙410083

出　　处：《中国有色金属学报》2005年第10期1544-1549,共6页The Chinese Journal of Nonferrous Metals

基　　金：国家高技术研究发展计划资助项目(2003AA305980);湖南省自然科学基金资助项目(05JJ30195)

摘　　要：采用电沉积方法制备了混合电容器钽基多孔氧化钌阴极涂层材料,探讨了电沉积过程中电沉积液的pH值随电沉积时间的变化关系,研究了电沉积时间对氧化钌沉积质量的影响。用X射线衍射和扫描电镜分别表征了热处理前后的涂层结构及涂层的多孔形貌,用循环伏安法测量了涂层的电容,并研究了热处理温度对电容量大小及其稳定性的影响。结果表明:电沉积的氧化钌为非晶态,涂层为纳米多孔结构;热处理有利于涂层孔隙结构及大小的均匀性,不同温度的热处理使涂层具有不同的电容,经热处理后涂层的电容稳定;经100℃热处理1 h后的多孔氧化钌涂层具有最大的比电容。Porous ruthenium oxide coatings as cathode material of hybrid capacitor were prepared on tantalum substrate by electrodeposition method. Change relation of bath pH and electrodeposition time and the influence of electrodeposition time on ruthenium oxide coatings mass during electrodeposition were investigated. The structures and morphologies of the coatings were analyzed, respectively, by X-ray diffractrometry and Scanning electron microscopy before and after heat-treatment. The influence of heat-treatment temperature on the content of coating capacitance were studied. The results show that the coatings compose of amorphous ruthenium oxides and the nano-porous structures form in the coatings. The specific capacitance varies with the change of heat treatment temperatures. The uniformity of porous structures can make the capacitance of the coating stable and the content of the coating capacitance reaches the highest after heat-treated at 100 ℃ for 1 h.

关 键 词：氧化钌 多孔涂层 阴极材料 混合电容器 电沉积 纳米多孔结构 制备与表征 阴极涂层 电容器 混合 

分 类 号：TQ151.15[化学工程—电化学工业] O484.1[理学—固体物理]