高速压力机惯性力平衡装置及其特性研究(二)  

Investigation on Inertial Force Balance Assembly Units and Their Dynamic Characteristics of a High-Speed Press (Part II)

作　　者：赵升吨[1] 张学来[1] 高长宇[1] 柳伟[1] 张永[1] 

机构地区：[1]西安交通大学机械工程学院,陕西西安710049

出　　处：《锻压装备与制造技术》2005年第5期14-20,共7页China Metalforming Equipment & Manufacturing Technology

基　　金：全国高校优秀博士学位论文专项基金资助项目(199930);陕西省科技攻关计划资助项目(2003K06-G20)

摘　　要：在分析高速压力机惯性力平衡问题研究的必要性的基础上,根据高速压力机的工作特点,论述了高速压力机的惯性力降低及平衡的途径,明确指出在高速压力机上不宜采用气动缸平衡装置。对目前广泛采用的5种惯性力平衡机构的工作特点进行了分析,提出了高速压力机惯性力平衡效果的科学评价指标。从而为研制高速压力机新的高性能平衡机构奠定了基础。On the basis of briefly exploring investigation necessary to dynamic balance assembly units of inertial force produced by a high-speed press.The approaches to decrease and balance inertial force produced by a high-speed press are illustrated, and definite reasons that the pneumatic cylinder is not suitable to dynamic balance for inertial force of a high-speed press are expounded.Dynamic characteristics of the five kinds of inertial force balance assembly units popular in modern industry are comprehensively and thoroughly investigated.The scientific evaluation parameter of the inertial force balance units for a high-speed press is put forward.Consequently a foundation of researching and developing high-performance inertial balance equipment for a high-speed press is laid.

关 键 词：机械制造 惯性力平衡装置 高速压力机 研究 

分 类 号：TG385.1[金属学及工艺—金属压力加工]