传染性隔离病房气流组织设计研究  

Air distribution design for infectious isolation wards

作　　者：狄彦强[1] 王清勤[1] 许钟麟[1] 张益昭[1] 赵力[1] 刘华[1] 于玺华[2] 

机构地区：[1]中国建筑科学研究院空气调节研究所 [2]解放军三○二医院

出　　处：《暖通空调》2005年第11期83-87,共5页Heating Ventilating & Air Conditioning

摘　　要：国外对于传染性隔离病房气流组织设计的建议基本上是针对单人病房提出的,然而在相当多国家和地区,为了减少病房建设初投资以及建成后的运行费用,大多采用多病床隔离病房。采用实验和数值模拟相结合的方法研究了不同气流组织形式对病人污染物扩散的影响,并就合理设计传染性隔离病房气流组织提出了建议。Suggestions about air distribution design for infectious isolation wards were almost put forwards for single ward at abroad. However, the isolation wards are of more than one bed in order to reduce initial costs and use-cost of the wards in most countries and areas. Studies the influence of different air distribution modes on the diffusion of patient contaminants by the method combined experiment with numerical simulation, and gives some suggestions about how to design the air distribution of infectious isolation wards properly.

关 键 词：传染性隔离病房 气流组织 实验研究 数值模拟 

分 类 号：TU831.8[建筑科学—供热、供燃气、通风及空调工程]