高强钛合金斜轧管材组织性能的研究  

Study on microstructure and mechanical properties of high strength titanium alloy cross-rolled tube

作　　者：于顺兵[1] 李德富[1] 陈海珊[1] 高莹[1] 赵云豪[1] 沈健[1] 

机构地区：[1]北京有色金属研究总院,北京100088

出　　处：《塑性工程学报》2005年第6期26-29,共4页Journal of Plasticity Engineering

摘　　要：研究了高强钛合金TB2斜轧穿孔管材的组织和力学性能,并对拉伸试样断口形貌进行了分析。研究结果表明,TB2合金斜轧穿孔管材晶粒细化,斜轧态为完全β单相组织,时效后为α+β两相的等轴组织;斜轧态和固溶状态塑性指标较高,有利于进一步塑性加工,时效后强度较高;管材拉伸试样断口分析发现,斜轧态和固溶状态表现为布满韧窝的塑性断口,时效后为韧脆混合断口。Microstructure, properties and fracture surface of high strength titanium alloy TB2 cross-rolled tube were studied. The results showed that grains of cross-rolled tube are fined, raw cross-rolled tube have only αβ phase microstructure and α＋β bimodal equiaxed mierostrueture were obtained after aging treat; the ductility of raw cross-rolled and solution state tube is excellent which is advantage to deep deformation process, tensile strength is higher after aging treat; the raw crossed-rolled tube have plastic dimple fracture surface and aging treat tube have plastic and brittle mixed fracture surface.

关 键 词：钛合金 TB2 管材 斜轧 组织 性能 

分 类 号：TG146.2[一般工业技术—材料科学与工程] TG335.17[金属学及工艺—金属材料]