检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国石油大学(华东)
出 处:《油气地质与采收率》2005年第6期55-57,共3页Petroleum Geology and Recovery Efficiency
基 金:中国石油化工集团公司项目"利用地球物理资料进行油藏建模的新技术研究"(P02038)部分研究成果
摘 要:针对樊124区块低渗透油藏储层物性变化大,注水不见效及单井含水率变化复杂等问题,在油藏数值模拟过程中,采取了按沉积微相分区设置相对渗透率曲线、开发动态与地震解释和测井解释相结合等方法。模拟结果表明,该区块注水不见效的主要原因是封闭断层的遮挡作用,岩性变化带处的单井含水率受岩性的控制,剩余油主要分布在区块中部及东南部物性较好的区域。实例表明,多学科一体化方法能提高低渗透油藏数值模拟的准确性。According to large variation of reservoir physical properties, non-effect of water injection and complex variation of water cut in single well in low permeability oil reservoir of F124 block,the method of setting relative permeability curve partitional, dynamical adjusting conductivity , taking advantage of seismic interpretation and log interpretation and the wells dynamic exploitation were adopted in the process of reservoir numerical simulation. The simulation results showed the reason of in-jection invalidity existed in low permeability reservoir F124 block,that was,it shelted from sealed faults,the water cut of single well at lithology variation zone was controlled by the lithology. The remaining oil mainly distributed in the central and southeast part which had better reservoir property. The case presented that the method of interdisciplinary integrated technique could enhance the veracity of the reservoir numerical simulation.
关 键 词:低渗透油藏 数值模拟 油藏模型 历史拟合 剩余油分布
分 类 号:TE348[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7