坐水播种注水水柱对沟底冲击压强信号的采集及分析方法  

The Design Principle of Irrigating-sowing Machine and the Methods of Signal Collecting and Analysis of Water Column Impinging Pressure

在线阅读下载全文

作  者:王利强[1] 吴崇友[2] 高连兴[1] 金诚谦[2] 夏晓东[2] 

机构地区:[1]沈阳农业大学工程学院,辽宁沈阳110161 [2]农业部南京农业机械化研究所,江苏南京210014

出  处:《灌溉排水学报》2005年第6期35-37,44,共4页Journal of Irrigation and Drainage

基  金:国家"863"节水重大科技专项课题(2002AA2Z4111)

摘  要:穴灌坐水播种最大的难点就是种子与穴施水在播施过程中难以同位,提出了同步信号自动控制的穴施水机构,试验表明其种液同位合格率达97.8%,较好的解决了种液同位问题,但是作业过程中发现有施水飞溅现象,同时种子随穴灌水流在沟内运动随机,快速作业时更突出,影响了施水与播种质量。要解决这一问题、彰显穴灌坐水播种的优势就必须正确认识灌溉冲击水柱在沟内的水力特性,特别是灌溉水注对种沟沟底的冲击压力特性。针对以上问题,提出利用计算机直接测试装置对灌水冲击压力进行样本数据采集,给出了信号采集的方法及系统组成,并对信号采集过程中采样频率、采样次数等的确定及信号在时域、频域内的相关分析方法进行了研究。A new type of irrigating-sowing machine was brought forward in this paper, which can ensure the seeds and water flow into seedbed furrow together in same level. The sample data of impinging pressure of irrigating water column impinging to seedbed furrow can been direct collected by computer, and the water power characteristic of impinging water column can been studied by analyze the sample data. It is important to collect the sample data correctly, a system was designed to collect the impinging pressure signal in this paper. Moreover, the process of signal processing and signal collecting , and the analytic methods to the signal in timedomain and frequency-domain was studied.

关 键 词:坐水播种 冲击压力 数据采集 信号分析 水柱 

分 类 号:S223.2[农业科学—农业机械化工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象