焦化气制氢工艺的开发及工业应用  

THE DEVELOPMENT AND COMMERCIAL PRACTICE OF A HYDROGEN PRODUCTION PROCESS WITH COKING GAS AS FEED

作　　者：刘伯龙 孙樵 毕文波 杨连栋[1] 庄福成[1] 刘贞华[1] 

机构地区：[1]长岭炼油化工总厂,石油化工科学研究院

出　　处：《石油炼制与化工》1996年第1期1-5,共5页Petroleum Processing and Petrochemicals

摘　　要：介绍了焦化气制氢技术从试验室开发到工业应用的过程。焦化富气经脱重组分、胺脱硫处理后，再采用新研制的ＲＳ－２００催化剂进行加氢精制，可使气体中总硫＜０．３ｍｇ／ｍ￣３、烯烃（体积分率）＜０．１％，达到高效水蒸气转化催化剂对原料的要求。通过制氢工艺生产出纯度９８．６％以上的合格工业氢气。ＲＳ－２００催化剂活性高、性能稳定；焦化气氢碳比高，制氢时水碳比低，转化温度低，转化率高。以焦化气代替石脑油作原料，在技术及经济上是可行的。The development and commercial practice of a hydrogen production process with coking gas as feed is summarized. A qualified feed for hydrogen production unit can be prepared from coking gas through compressing, absorption of 3 carbon and heavier, amine sweetening, and succeeded by a hydrofining process using a newly developed RS-200 catalyst which possessed high activity and stability.The sulfur and olefin content in the finalized gas can be less than 0. 3 mg/m3 and 0. 1 vol% respectively,which can be acceptable to the steam hydrocarbon reforming catalyst. Since the said treated coking gas had high hydrogen/carbon ratio than naphtha feedstock, which resulted less water/carbon ratio, lower reaction temperature and higher conversion in the hydrogen production process. The hydrogen purity was over 98. 6 vol %.

关 键 词：脱硫 加氢精制 水蒸气 催化剂 焦化气 制氢工艺 

分 类 号：TE624.431[石油与天然气工程—油气加工工程]