环氧丙烷催化异构化制丙醛单管试验  

PREPARATION OF PROPIONALDEHYDE FROM CATALYTIC ISOMERIZATION OF PROPYLENE OXIDE BY SINGLE TUBE REACTOR

作　　者：高峰[1] 吴素芳[1] 

机构地区：[1]浙江大学化工系,杭州310027

出　　处：《精细石油化工》1996年第1期54-58,共5页Speciality Petrochemicals

摘　　要：在 Φ32 mm× 2 mm长 70 0 mm的单管反应器中 ,研究了以 x Cr2 O3· WO3为催化剂 ,在预热和导热油温度 2 2 5～ 30 0℃下 ,环氧丙烷异构化制丙醛的工艺操作条件。环氧丙烷转化率大于 99% ,丙醛分析得率为 85%～ 88% ,同时测定了床层内的温度分布和热点 ,表征了催化剂的失活速率。The process conditions for prepared propionaldehyde from catalytic isomerization of propylene oxide were studied under the temperature of preheat and conductor oil are 225～300 ℃ and xCr 2O 3·WO 3 as catalysts in the single tube reactor (sized 32 mm×2 mm, length 700 mm). The conversion ratio of propylene oxide is over 99% and yield of propionaldehyde is 85%～88% by analysis of product. The temperature distribution and heat point of the bed have been deternlined and the deactivate rate of the catalyst also has been expressed. The result could provide a basis for producing propionaldehyde in the plant.

关 键 词：丙醛 环氧丙烷 催化异构化 单管反应器 

分 类 号：TQ224.125[化学工程—有机化工]