Ti对不同冷却条件下Cu75Cr25合金凝固相变及其组织的影响  

Influence of Ti on Solid Microstructure and Phase Transformation of Cu75Cr25 Alloy at Different Cooling Conditions

作　　者：刘海荣[1] 孙占波[2] 顾林喻[1] 

机构地区：[1]西安工业学院材料与化工学院,陕西西安710032 [2]西安交通大学理学院,陕西西安710049

出　　处：《热加工工艺》2005年第12期61-63,共3页Hot Working Technology

基　　金：国家自然科学基金资助项目(50371066)

摘　　要：采用加钛合金化的方法得到了不同冷却条件下Cu-Cr-Ti合金的凝固组织。利用带有能谱(EDS)的扫描电镜(SEM)分析了富Cr相的形态、成分以及形成机制。结果表明:在电弧熔炼条件下,加入合金元素Ti,合金正常凝固的过程得到抑制,凝固后期的共晶反应被液相分解反应取代;在快速凝固条件下,加入合金元素Ti,液相分解组织之间的聚集现象更加严重。EDS结果表明,合金元素Ti加大了Cu、Cr之间的固溶度,但基体中的含Cu量变化不大。The microstructures of Cu-Cr-Ti alloy were obtained by alloying way at different cooling conditions. The morphologies, compositions and mechanism of Cr rich phases were analyzed by SEM and EDS. The results show that the normal solidification process is restrained, and the eutectic reaction is replaced by the liquid phase separation reaction when Ti element was added under arc melting. The integrations between liquid phase separation microstructures became serious when Ti element was added under rapid solidification. EDS results show that the solid solubility between Cu and Cr is enlarged by adding Ti, while copper content in matrix had a little change.

关 键 词：合金化 Cu-Cr-Ti合金 液相分解 

分 类 号：TG146.11[一般工业技术—材料科学与工程]