Fenton试剂氧化预处理橡胶促进剂生产废水  

Pre-treatment of Rubber-Assistant wastewater

作　　者：陈广春[1] 袁爱华[1] 唐玉斌[1] 田园[1] 

机构地区：[1]江苏科技大学环境工程系,江苏镇江212003

出　　处：《苏州大学学报（自然科学版）》2005年第4期71-74,共4页Journal of Soochow University(Natural Science Edition)

基　　金：镇江市社会发展项目(SH2003050)

摘　　要：采用Fenton试剂氧化处理橡胶促进剂生产废水.研究H2O2投加量、Fe2+投加量、反应时间及进水浓度对COD去除率的影响,通过实验确定了Fenton试剂处理该废水的最佳操作条件为:Fe2+加入量0.4g.L-1,反应时间20 min,H2O2加入量为18 mL.L-1,pH=3.Fenton reagent was used to oxygenate the rubber-assistant wastewater as an pre-treatment before biological reaction. The effect of [ H2O2 ], [ Fe^2＋ ], initial [ COD] and reaction time on COD removal rate were investigated. An orthogonal experiment was studied to give the best operation condition, the best parameters are： [Fe^2＋] = 0.2g·L^-1,t = 20min,[H2O2]= 12ml·L^-1, pH = 3.0.

关 键 词：FENTON试剂 氧化 橡胶促进剂废水 预处理 

分 类 号：O175.25[理学—数学]