贴体坐标系下喷动床内气固两相流体动力特性的数值模拟  

Gas-Solid Flow Simulations in Spouted Beds on Body-Fitted Coordination

作　　者：何玉荣[1] 孙巧群 陆慧林[1] 刘文铁[1] 金记英[1] 

机构地区：[1]哈尔滨工业大学能源科学与工程学院,哈尔滨150001

出　　处：《燃烧科学与技术》2006年第1期59-64,共6页Journal of Combustion Science and Technology

基　　金：国家自然科学基金资助项目(50376013)

摘　　要：采用稠密固相动力-摩擦应力模型,建立喷动床内气固两相双流体模型．应用贴体坐标系使得计算网格与喷动床的倒锥体边界相一致．通过数值模拟获得喷动床内喷射区、环隙区和喷泉区内颗粒速度及浓度分布．计算结果表明,喷泉区具有强烈的气固两相质量和动量交换．当倒锥体倾斜角度达到60°,在射流入口处形成一瓶颈．研究表明颗粒间滑动-滚动摩擦应力对环隙区颗粒流动具有明显的影响．A gas-solid two-fluid model is presented in which the kinetic-frictional rheological model for dense assemblies of solids is incorporated in the simulation for spouted bed. This model treats the kinetic and frictional stresses of particles additively. The body fitted coordination is used to make the grids best fit the outline of a conical contour of the base in the spouted bed. The typical flow patterns in spouted beds were obtained, i. e. , the spout, the fountain and the annular zones, and clearly indicated. Effects of operating conditions and geometrical dimensions of conical contour on partical velocity and concentration in the spout, annulus and fountain are determined. Our simulations showed that as the inclined angle decreases, the diameter of the spout increases. For an inclined angle of 60° and greater, there is a neck near the inlet of spouted beds. Simulations of particle concentration and velocity distributions in a spouted bed revealed that the frictional stresses were significant effect on the flow of particles in the annulus.

关 键 词：气固两相喷动床 动力-摩擦应力模型 贴体坐标系 

分 类 号：O35[理学—流体力学]