甲醇裂解做内燃机燃料裂解催化制的研究  

Study on the Catalysts of Methanol Pyrolysis for Internal-Combustion Engine Fuel

作　　者：郭志英[1] 窦林琪 刘在昌 

机构地区：[1]中国科学院山西煤炭化学研究所

出　　处：《石油与天然气化工》1996年第3期115-118,共4页Chemical engineering of oil & gas

基　　金：山西省科委资助

摘　　要：在固定床连续流动式反应装置上评选出了三种不同类型的甲醇裂解催化剂。这些催化剂在液体空速１．５～４．５ｈ￣－１、温度２５０～４５０℃、压力０．５ＭＰａ的条件下使甲醇单程转化率达到９５％以上。产品气主要是ＣＯ和Ｈ＿２气，（Ｈ＿２／ＣＯ≈２）及少量ＣＯ＿２、ＤＭＥ（二甲醚）和水等杂质，产气组成稳定。其中一种催化剂在２０ｍｌ规模的反应装置上间歇累计运转了１０００ｈ，性能稳定。将该催化剂放大到１立升规模，在相同条件下，可以重复小试结果。该催化剂具有机械强度高，热稳定性好，抗积炭等特点，有可能在汽车用发动机代用燃料的制备中应用。Three different kinds of catalysts for methanol pyrolysis are screened out on a continuous fixed bed reactor system.By using these catalysts,the methanol conversion rate of more than 95% without gas recycling can be obtained under conditions of liquid sauce velocity of 1.5 to 4. 5 h^-1,temperature of 250 to 450 ℃ and pressure of 0. 5 MPa.The composition of the produced gas is mainly CO and H_2 (H_2/CO is about 2)as well as small impurity of CO_2,DME and water,and is stable. One of the catalysts has been on stream for 1000 hours accumulatively on the 20-ml device.The test of this catalyst on one-liter scale device under the same conditions can repeat the resultS quite well. This catalyst possesses the features of high mechanic strength,good thermal stability and anticarbon deposition. it is possible to use this catalyst for the preparation of automobile substitute fuel.

关 键 词：甲醇 裂解 催化剂 内燃机 燃料 

分 类 号：O623.411[理学—有机化学] TQ517[理学—化学]