成形工艺参数对倾斜类管件正旋时旋压力的影响规律研究  

Effects of the forming parameters on the spinning force of the oblique tubes forward spinning

作　　者：夏琴香[1] 梁佰祥[1] 杨明辉[1] 阮锋[1] 程秀全[2] 

机构地区：[1]华南理工大学机械工程学院,广州510640 [2]广州民航职业技术学院,广州510403

出　　处：《塑性工程学报》2006年第1期47-52,共6页Journal of Plasticity Engineering

基　　金：国家自然科学基金项目(50275054);广东省自然科学基金项目(020923);广东省工业科技攻关计划项目(2003C102013)

摘　　要：采用有限元分析软件MARC,基于三维弹塑性有限元理论建立有限元模型,实现了对倾斜类管件旋压成形过程的数值模拟,阐述了倾斜管件正旋时旋压力的变化特征,探讨了工艺参数对旋压力的影响规律,研究结果为工艺参数的确定及优化提供了依据。在理论分析的同时,进行了倾斜类管件旋压成形工艺试验,模拟结果与工艺试验吻合较好。Based on 3D ELASTIC-PLASTIC theory, a finite element model has been established to analysis the spin-forming of the oblique tubes by the finite element software, MSC. MARC. In this paper, the distribution characteristics of the spinning force of the oblique tubes is presented, the effects of processing parameter on spinning force .are also explicated. The study provides a theoretical foundation for the designation and the optimization of the parameters. The simulation results conform well to the experimental one for several processing parameters.

关 键 词：倾斜类管件 旋压 正旋 旋压力 数值模拟 

分 类 号：TG386.43[金属学及工艺—金属压力加工]