曝气生物滤池工艺处理汽车涂装废水  

TREATMENT OF CAR-COATING WASTEWATER BY BIOLOGICAL AERATED FILTER

作　　者：朱乐辉[1] 付朝臣[1] 

机构地区：[1]南昌大学环境科学与工程学院,南昌330029

出　　处：《环境工程》2006年第1期76-78,共3页Environmental Engineering

摘　　要：采用曝气生物滤池(BIOFOR)工艺处理江铃集团汽车涂装废水取得了良好的效果。系统出水达到《污水综合排放标准》(GB89781996)一级排放标准,整个废水处理工程具有处理能力强、处理效果好、耐冲击负荷、不需二沉池、工艺流程简单等优点。Biological aerated filter (BIOFOR) is used to treat wastewater of cat-coating in Jiangling(Group) Co., Ltd, and a good effect is got, the water quality of the final effluent in this system meets the first grade of Intergrate Wastewater Discharge Standard(GB8978—1996). Furthermore this design has notable advantages, such as good treating effect, high capacity for adsorbing shockload, no requirement for secondary settlement tank, simple flow chart, etc.

关 键 词：涂装废水 曝气生物滤池 水解酸化 填料 

分 类 号：X703[环境科学与工程—环境工程]