Online forecasting model of tundish nozzle clogging  

作　　者：Fangming Yuan Xinghua Wang Jiongming Zhang Li Zhang 

机构地区：[1]Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China [2]Baoshan Iron ＆ Steel Co. Ltd., Shanghai 201900, China

出　　处：《Journal of University of Science and Technology Beijing》2006年第1期21-24,共4页北京科技大学学报（英文版）

基　　金：financially supported by the State Economic;Trade Commission of China (No.OIBK-098-02-07)

摘　　要：A nozzle clogging online forecasting model based on hydrodynamics engineering was developed, in which the actual flow rate was calculated from the mold width, thickness, and casting speed. There is a linear relationship between the theoretical flow rate and the slide gate opening ratio as the molten steel level, argon flow rate, and the top slag weight are kept constant, and the relationship can be obtained by regression of the data collected at the beginning of the first heat in each casting sequence when the nozzle clogging does not occur. Then, during the casting, the theoretical flow rate can be calculated at intervals of one second. Comparing the theoretical flow rate with the actual flow rate, the online nozzle clogging ratio can be obtained at intervals of one second. The computer model based on the conception of the nozzle clogging ratio can display the degree of the nozzle clogging intuitively.

关 键 词：continuous casting tundish nozzle CLOGGING online forecasting model 

分 类 号：TG233.6[金属学及工艺—铸造]