锡槽窄段锡液回流情况的研究  

Studies on Recirculation of Molten Tin at the Exit End of Tin Bath

作　　者：张丽英[1] 童树庭[1] 

机构地区：[1]同济大学材料科学与工程学院,上海200092

出　　处：《建筑材料学报》2006年第1期115-119,共5页Journal of Building Materials

摘　　要：用k-ε两方程模型建立了锡液流动的数学模型,通过分析锡槽窄段的锡液流动情况,提出了一种回流量的确定方法,并运用这种方法研究了锡槽窄段玻璃板下和板外的回流量之比(简称回流比).结果表明:回流比与锡槽深度并非线性关系,基于耗锡量、能量、清除锡灰等工作的总投入最低的原则,存在一个最优的槽深范围.The three-dimensional k-ε two-equation model of molten flow was established. The ratio between the recirculation beneath the glass sheet and that beside the sheet was studied based on a specific determination method of recirculation. The results show that the ratio is not linear with the depth of tin bath. According to design principle of low gross costs of tin, energy and workload of cleaning out dross, there exits an optimum depth range of tin bath.

关 键 词：锡槽 两方程模型 数学模型 回流比 

分 类 号：TQ171.721[化学工程—玻璃工业]