载银纳米二氧化钛抗菌粉体的制备工艺研究  

Preparation of Ag-embedded nano-TiO_2 Antibacterial Agent

作　　者：马登峰[1] 彭兵[1] 柴立元[1] 韦顺文[1] 王佳[1] 蔡练兵[1] 

机构地区：[1]中南大学冶金科学与工程学院,湖南长沙410083

出　　处：《精细化工中间体》2006年第1期63-66,共4页Fine Chemical Intermediates

摘　　要：以工业偏钛酸、工业浓硫酸为原料,采用稀释热水解法连续酸溶水解,并将银以磷酸难溶盐的形式载入,制备出载银纳米二氧化钛,优惠工艺条件:酸溶物料比H2TiO3/H2SO4=3(m/m),酸溶时间150～180 min,水解时间100～120 min,获得细小载银纳米前驱体。经喷雾干燥和450、500、550℃热处理后,XRD检测发现TiO2均为锐钛型,银未以银单质或银盐晶相出现在纳米粉体中。最终产品载银纳米二氧化钛粒径为20～80 nm,最小抑菌浓度达1.0×10-4 mg/kg,杀菌率为99.99%。In this study, precursor of nano-TiO2 was prepared from industrial H2TiO3 and 98% sulfuric acid in continuous acid dissolution and pyro-hydrolysis. The precursor was embedded with silver in the form of Ag3O4 The optimum parameters for the preparation was the ratio of H2TiO3 to H2SO4 in dissolving process=3 and time=150-180 min, hydrolysis time=100-120 min. After dried with a sprayer and thermal treated at 450℃, 500℃ and 550 ℃, the TiO2 present in the product was in anatase phase and without simple silver saline phase based on the analyses of X- ray Diffraction （XRD）. The particle size of product Ag-embedded nano-TiO2 was in the range of 20-80 nm. The minimum inhibitor concentration （MIC） of the product was 100 ppm and the efficiency of sterilization was 99.99%.

关 键 词：连续酸溶水解 载银绝米二氧化钛 抗菌剂制备 

分 类 号：TQ134.11[化学工程—无机化工]