板坯连铸机结晶器国产化改造  

Transformation of Mauld Local Conversion in Slab CCM

作　　者：王建春[1] 杨海龙[1] 尤善晓[1] 赵海峰[1] 陈彦博[1] 

机构地区：[1]邯郸钢铁集团有限责任公司,邯郸056003

出　　处：《冶金设备》2006年第1期55-59,71,共6页Metallurgical Equipment

摘　　要：为了提高邯钢三炼钢板坯的产量和质量,邯钢对板坯连铸机结晶器进行了国产化改造。改造的内容有结晶器铜板材质、厚度、镀层、水槽,水冷梁把合螺栓、喷淋水系统、倒锥度、角缝、水槽密封、过滤网的设计改造等。通过改造,达到了预期的目标,一次拉钢量达到了8.3万吨,结晶器经过简单调整后,铜板镀层一次拉钢量已达到12万吨,产品质量显著提高,满足了生产工艺使用要求。The paper lasted the analyse for Transformation local conversion of mould in slab CCM, on Hangang the third steal mill. By means of thansform,the desired goal is achieved. The per time output has achieved 8.3 ten thousand ton after the mould is simply regulated. 12 ten thousand ton. The product quality is notably raised The per time output of plating film of copper has achieved Thuse demand of production technology is met.

关 键 词：结晶器 铜板 镀层 改造 

分 类 号：TF341.6[冶金工程—冶金机械及自动化]