酸焦油聚合物配煤炼焦试验研究  

Study on Coking Experiments of Adding Acid Tar Polymer into Blending Coal

作　　者：齐婳[1] 陈昌华[1] 李德瑾[1] 胡新亮[1] 纪同森[1] 

机构地区：[1]济南钢铁集团总公司,山东济南250101

出　　处：《山东冶金》2006年第1期33-34,共2页Shandong Metallurgy

摘　　要：为妥善解决酸焦油的综合利用与处置问题,采用真空蒸汽蒸吹回收轻油,再采用聚合反应法固化处置,得到沥青状不粘性易碎固体聚合物,进行配煤炼焦试验。试验结果表明:分别配用0.2%、0.5%、1.0%的酸焦油聚合物后,与基准样相比,焦炭的冷态强度和热态强度、灰分变化不大,而焦炭硫分随配量的增加呈现上升趋势,约上升0.01%～0.03%。In order to obtain better disposition of acid tar, the experimental plan of blending and coking is applied. At first, callback oil by evaporation, secondly, carrying out aggregation and last, obtaining acid tar polymer and adding the polymer into blending coal. The results show that adding acid tar polymer in percent of 0.2, 0.5 or 1.0 into blending coal, the cold and hot intension, ash percent of coke changed not too much but the sulphur percent of coke changed upward and raised 0.01 to 0.03 percent.

关 键 词：酸焦油 聚合物 配煤炼焦 

分 类 号：X784[环境科学与工程—环境工程]