(Zn,M)TiO_3(M=Co,Ni,Co_(0.5)Ni_(0.5))固溶体的溶胶-凝胶法合成  

Synthesis of the (Zn, M)TiO_3 (M=Co, Ni, Co_(0.5)Ni_(0.5)) Solid Solution by a Sol-gel Route

作　　者：罗君[1] 张梅[2] 邢献然[1] 于然波[1] 邢奇凤[1] 刘桂荣[2] 

机构地区：[1]北京科技大学理化系,北京100083 [2]北京科技大学冶金与生态工程学院实验技术中心,北京100083

出　　处：《无机化学学报》2006年第4期625-628,共4页Chinese Journal of Inorganic Chemistry

基　　金：国家自然科学基金(No.20331030;50374009);教育部TRAPOTY基金项目资助。

摘　　要：通过改进的溶胶-凝胶工艺在低温(800℃)下合成了基于钛酸锌(ZnTiO3)体系的(Zn1-xCox)TiO3、(Zn1-xNix)TiO3和[Zn1-x(Co0.5Ni0.5)x]TiO3陶瓷固溶体。采用X射线衍射分析(XRD)和差示扫描量热法(DSC)等测量技术对产物进行了物相和热稳定性分析。XRD结果表明,获得单一六方相(Zn1-xCox)TiO3、(Zn1-xNix)TiO3和[Zn1-x(Co0.5Ni0.5)x]TiO3时各自的固溶稳定区间为0.5≤x≤1.0,0.9≤x≤1.0和0.8≤x≤1.0。与此同时,热分析结果证实,伴随钛酸锌基陶瓷体系掺杂钴量的增加,其六方相的热稳定性提高,且效果比掺杂镍更加显著。The solid solution of （Zn1-xCox）TiO3,（Zn1-xNix）TiO3 and [Zn1-x（Co0.5Ni0.5）x]TiO3 based on ZnTiO3 system were synthesized at low temperature （800 ℃） by a modified sol-gel route. The phase distribution and thermal stability of these products were conducted by using X-ray diffraction （XRD） analysis and differential scanning calorimetry （DSC） measurements. The XRD results showed that the single phase of hexagonal （Zn1-xCox）TiO3, （Zn1-xNix）TiO3, and [Zn1-x（Co0.5Ni0.5）]TiO3 could only be obtained at 0.5 ≤ x ≤1, 0.9≤x ≤1 and 0.8 ≤ x ≤ 1, respectively. Meanwhile, the thermal analysis results indicated that the thermal stability of these ZnTiO3-based ceramics Were enhanced by the increasing amount of cobalt substitution, and that cobalt substitution than nickel substitution. appeared more remarkably than nickel substitution.

关 键 词：钛酸锌基陶瓷 溶胶-凝胶工艺 热稳定性 

分 类 号：O614.411[理学—无机化学] O614.241[理学—化学]