碳纤维增强酚醛树脂/石墨复合材料双极板的低温热模压试验研究  

Experimental Research On Pressure Molding Formation for Carbon Fiber Reinforced PF Resin/Graphite Composite Bipolar Plate

作　　者：王彦明[1] 王威强[2] 李爱菊[3] 阴强[3] 夏利刚[3] 敖海勇[3] 童佳佳[3] 

机构地区：[1]山东大学土建与水利学院 [2]山东大学机械工程学院 [3]山东大学材料液态结构及其遗传性教育部重点实验室工程陶瓷山东省重点实验室,山东济南250061

出　　处：《材料科学与工程学报》2006年第2期218-222,共5页Journal of Materials Science and Engineering

摘　　要：介绍了国外制备树脂/石墨复合材料双极板的研究结果。研究了低温热模压成型工艺制备酚醛树脂/石墨复合材料双极板,结果表明:酚醛树脂含量为15wt%时,复合材料的导电性能满足双极板的要求,但力学性能偏低。提出了碳纤维增强的解决方案,研究了碳纤维表面处理方法以及碳纤维含量对复合材料导电性能与力学性能的影响。得到对碳纤维进行液相氧化处理,碳纤维含量3wt%是综合性能较好的一种试验方案。采用低温热模压工艺制备低成本酚醛树脂/石墨复合材料双极板,双极板材料的性能突破必将促进燃料电池的商业化发展。Foreign researching results on resln/graphite composite bipolar plate were reviewed in this article. One kind of PF resin/ graphite composite was obtained by low temperature and hot pressure molding formation. As PF resin content is 15wt%, the conducting property can meet the bipolar plate demand , but the mechanical property is lower. Research was done on carbon fiber reinforcing composite. Influence of carbon fiber surface treatment and its content on composite property was analyzed. A better schedule was got by carbon fiber liquid-phase oxidative treatment and 3wt% content. By low temperature and hot pressure molding formation, the breakdown on PF resin/ graphite composite property will active the industrialization of PEMFC surely.

关 键 词：酚醛树脂/石墨复合材料 双极板 低温热模压 碳纤维 

分 类 号：TM911.4[电气工程—电力电子与电力传动]