应用小型梳毛机预测和控制毛条加工质量的研究  

Study of the top quality prediction and control with the small card machine

作　　者：张得昆[1] 臧衍乐[1] 张星[1] 

机构地区：[1]西安工程科技学院纺织与材料学院,陕西西安710048

出　　处：《西安工程科技学院学报》2006年第1期21-23,共3页Journal of Xi an University of Engineering Science and Technology

摘　　要：研究一种预测和控制毛条加工质量的方法将洗净后的原毛,经过XF小型梳毛机梳理,测试其下机毛条的纤维长度、长度离散及30mm以下短绒率等,建立这些纤维与最终成品毛条中的纤维之间的关系式,利用它预测成品毛条的质量,并控制毛条的加工过程.研究结果表明,经小型梳毛机梳理后的纤维与最终成品毛条的质量具有密切关系,利用它可以较好地预测和控制毛条的加工质量.A method of the top processing quality control and prediction is irivestigated. The scoured wool was carded by the XF small carding machine, then the fiber length, the length deviation and the noil were tested. There is high correlation between them and the top parameters, so that the quality of the top can be predicated and controlled. This method is simple, the accuracy of prediction is high.

关 键 词：毛条加工 质量预测 纤维长度 小型梳毛机 

分 类 号：TS134.32[轻工技术与工程—纺织材料与纺织品设计]