复合软包装材料(BOPET/AL/LDPE)撕裂性能的研究  

Study on the tear properties of multi-layer packaging material (BOPET/AL/LDPE)

作　　者：刘进华[1] 李大纲[1] 章育骏 

机构地区：[1]南京林业大学,南京210037 [2]南京沪江复合材料有限公司,南京211112

出　　处：《包装工程》2006年第2期48-49,56,共3页Packaging Engineering

基　　金：国家自然科学基金资助项目(30271050);东北林业大学教育部生物质材料重点实验室基金(04-01)

摘　　要：为更好解决商品包装使用中的撕裂问题,研究了在不同加载速率下,复合软包装材料(BO-PET/AL/LDPE)的4种割口深度和5种割口角度的撕裂强度。研究结果表明:割口角度一定时,割口深度小的试样的撕裂强度反而大;当割口角度在45°≤α≤90°之间时,随着割口角度的增加,撕裂强度呈上升趋势;加载速率较低时,其撕裂强度较小;加载速率对撕裂强度有显著影响,而割口角度对撕裂强度的影响不显著。The influence of loading rate on tear properties of multi - layer packaging material （ BOPET/AL/LDPE） with four cut depths and five cut angles was studied. The results showed that when the cut angle is constant, the less cut depth the bigger the tear strength of the samples is; when the loading rate is less, the tear strength is less. When cut angle is between 45°and 90°, tearing strength increase with the cutting angle increase. Loading rate has significant effects on tearing strength. CuRing depth does not have significant effects on tearing strength.

关 键 词：软包装复合材料 加栽速率 割口角度 割口深度 撕裂强度 

分 类 号：TB484.3[一般工业技术—包装工程] TB487