膜聚结法油品脱水研究  

Removing water from fuel with membrane coalescing separation

作　　者：刘亚莉[1] 许培援[1] 戚俊清[1] 白净[1] 

机构地区：[1]郑州轻工业学院材料与化工学院,郑州450002

出　　处：《膜科学与技术》2006年第2期49-51,55,共4页Membrane Science and Technology

基　　金：河南省重点科技攻关项目(0423021800)

摘　　要：对研制的聚结分离床进行了油品脱水的实验研究,结果表明:分离效率随流率的变化存在着高效分离区和基本分离区,高效分离区的脱水率达70%以上,而在较高的处理量下,聚结分离床仍具有一定的基本分离效果.分离效率与处理流率、油品性质、初始含水量、分离床的特征尺寸等有关.The effect of a variety of experimental parameter has been examined with respect to the performance of membrane bed for removing water from fuel. The studies show that the separation efficiency has a critical value with increasing flow velocity, and it provides a high separation efficiency of over 70% below the critical flowrate and a basic separation efficiency at higher flowrates. The effect of flow velocity, fuel/water properties, initial water hold - up and the average diameter of membrane bed on the separation efficiency of the membrane coalescence is studied in this paper.

关 键 词：膜床 聚结 油品脱水 

分 类 号：TE624.1[石油与天然气工程—油气加工工程]