10CrNi3MoCu钢的堆铜焊工艺  

SURFACING TECHNOLOGY OF COPPER ALLOY ON 10CrNi3MoCu

作　　者：姜军记[1] 倪世丰[1] 张鹏举[1] 

机构地区：[1]海军驻九江地区军事代表室

出　　处：《焊接》2006年第4期54-56,共3页Welding & Joining

摘　　要：在低合金高强钢10CrNi3MoCu上进行了堆铜焊的工艺研究,由试验选定了焊接方法、熔滴过渡形式和焊接工艺参数等。通过外观检查、无损检测和破坏性实验,证实该工艺能够满足相关要求,并在实际工程中得到应用,进一步验证了该工艺的可行性。Surfacing.technology of copper alloy on high-strength low alloy steel 10CrNi3MoCu was studied. The welding methods, metal transfet, welding parameters etc were determined by the experiments. According to the results of the appearance, nondestructive and destructive examinations, the technology was verified to meet the relevant requirements and can be used in the practical projects, which further confirmed the feasibility of the technology.

关 键 词：10CrNi3MoCu 堆焊 工艺 

分 类 号：TG142.33[一般工业技术—材料科学与工程] TG454[金属学及工艺—金属材料]