U型单相自起动永磁同步电机参数计算与起动特性分析  

Calculation for parameter and dynamic analysis of U-shape single-phase line-start permanent magnet motors

作　　者：付敏[1] 邹继斌[1] 李文娟[2] 魏静薇[2] 

机构地区：[1]哈尔滨工业大学,哈尔滨150001 [2]哈尔滨理工大学,哈尔滨150040

出　　处：《微电机》2006年第2期22-25,共4页Micromotors

摘　　要：为了使U型单相永磁同步电机实现自起动,气隙采用非对称形式。文中基于二维有限元法对电机绕组电感、磁链和定位转矩进行了计算。在此基础上,针对所建立的动态数学模型,用龙格库塔法对空载起动过程进行了动态仿真计算,得到该电机电流、转矩和转速曲线。同时讨论了电源合闸角、转子初始相角、磁链和负载转矩对电机转速和旋转方向的影响。本文所论述的工作为该电机的进一步理论研究与优化设计奠定了基础。In order to slngle-phase permanent magnet motor is line-starting, the air-gap of the motor is asymmetrical. The inductance of stator winding, flux linkage and cogging torque are calculated by the twodimensional finite element. The processes of stating are simulation by Runge-Kutta on the mtathematieal model of dynamic. The current ,torque and speed curve are gained. Influences on the speed and direction of the rotation by the phase angle of the supply voltage,initial angle of rotor position ,PM line flux and the load torque are discussed. The work is a basis for the analysis and the optimizing design of the single-phase permanent magnet synchronous motor.

关 键 词：单相永磁电机 永磁同步电动机 不对称气隙 动态仿真 定位转矩 自起动 

分 类 号：TM351[电气工程—电机] TM352