3004铝合金铸轧和热轧法生产罐用薄板中间工艺阶段的ODF分析  

ODF ANALYSIS OF 3004 ALUMINIUM ALLOY CANMAKING SHEET IN THE MIDDLE PROCESSING STATE FROM CONTINUOUS CASTING AND HOT ROLLING

作　　者：温熙宇[1] 王玉林[1] 郑炀曾[1] 何崇智[1] 

机构地区：[1]燕山大学,冶金部钢铁研究总院,燕山大学材料系

出　　处：《材料研究学报》1996年第4期378-382,共5页Chinese Journal of Materials Research

基　　金：国家自然科学基金

摘　　要：用取向分布函数（ＯＤＦ）分析了３００４铝合金铸轧和热轧法生产罐用薄板中间工艺阶段的织构类型，并且对两种工艺产生的织构进行了详细的比较．实验结果表明：两种工艺中有一部分织构类型相同；一部分织构类型相近；另一部分织构相差很大，热轧板中织构较稳定，冷轧板中织构较易变化．The characteristics of texture in the 3004 Al canmaking sheet in the middle processing state from continuous casting and hot rolling were analysed by using ODF, and the produced textures in the two technologies were compared carefully. Experimental results show that there are the same textures, resemble textures and different textures in the two technologies. The textures in hot rolling sheet are steady. The textures in cold rolling sheet are unsteady.

关 键 词：铝合金 铸轧 热轧 织构 

分 类 号：TG339[金属学及工艺—金属压力加工]