铁素体不锈钢连铸板坯宽度尺寸的控制  

Breadth control of continuous casting slabs for ferrite stainless steel

作　　者：刘承志[1] 赵鸿燕[1] 

机构地区：[1]太原钢铁(集团)有限公司

出　　处：《连铸》2006年第3期34-35,共2页Continuous Casting

摘　　要：铁素体不锈钢由于高温强度低,直弧型连铸机生产的板坯宽度尺寸难以满足公差要求。本文对铁素体不锈钢板坯宽度不合公差要求的原因进行了分析,并提出相应的工艺措施。Because the high temperature strength of the ferrite stainless steel is low, the breadth of the slab made from the vertical - arc continuous casting machine do not reach tolerance. The cause was analyzed and corresponding improving measure was described.

关 键 词：铁素体不锈钢 宽度尺寸 连铸板坯 控制 弧型连铸机 高温强度 板坯宽度 工艺措施 公差 

分 类 号：TF777[冶金工程—钢铁冶金]