环状热网故障工况限额供热的研究  

Study on Quota Heating under Fault Condition of Ringshaped Heat-supply Network

作　　者：王晓霞[1] 邹平华[2] 

机构地区：[1]广东工业大学建设学院,广东广州510006 [2]哈尔滨工业大学市政环境工程学院,黑龙江哈尔滨150090

出　　处：《煤气与热力》2006年第6期61-64,共4页Gas & Heat

基　　金：国家自然科学基金资助项目(50378029);广东工业大学博士基金项目(053025)

摘　　要：建立了环状管网水力工况的数学模型,给出限额供热的压头校核公式。以某环状管网为例,当某管段发生故障,采用非限额供热时,距热源较远的用户流量过小,无法满足最低供热量;采用限额供热时,可实现各热用户供热均衡。对正常工况及限额供热工况的水压图进行了分析比较。当环状管网干线发生故障时,宜采取限额供热。The mathematical model of hydraulic regime of ring-shaped heat-supply network is established, and the pressure head check formula for quota heating is given. Taking a ring-shaped heat- supply network for example, when non-quota heating is used due to fault of a pipeline section, the flow rate obtained by heat users being away from heat source is too small to satisfy the lowest heating requirement; when quota heating is used, the heating balance of all heat users can be attained. The pressure diagrams of normal condition and quota heating condition are compared. The quota heating should be used when a fault takes place at the main of ring-shaped heat-supply network.

关 键 词：环状热网 故障工况 限额供热 

分 类 号：TU995[建筑科学—供热、供燃气、通风及空调工程]