电子束蒸发氧化锆薄膜的粗糙度和光散射特性  

Roughness and light scattering properties of ZrO_2 thin films deposited by electron beam evaporation

作　　者：侯海虹[1] 孙喜莲[1] 申雁鸣[1] 邵建达[1] 范正修[1] 易葵[1] 

机构地区：[1]中国科学院上海光学精密机械研究所

出　　处：《物理学报》2006年第6期3124-3127,共4页Acta Physica Sinica

摘　　要：利用电子束蒸发工艺,以Ag层为衬底,沉积了中心波长为632·8nm的氧化锆(ZrO2)薄膜,膜层厚度在80—480nm范围内变化.研究了不同厚度样品的粗糙度变化规律和表面散射特性.结果发现,随着膜层厚度的逐渐增加,其表面均方根(RMS)粗糙度和总积分散射(TIS)均呈现出先减小后增大的趋势.利用非相关表面粗糙度的散射模型对样品的TIS特性进行了理论计算,所得结果与测量结果相一致.Zirconium oxide （ZrO2 ） coatings for 632.8nm center wavelength were deposited on the Ag layer by electron beam evaporation, optical thickness of which varied in the range of 80-480nm. Surface roughness and scattering characteristics of ZrO2 coatings with different thickness were investigated. It was found that with the gradually increase of the thickness, both roughness and total integrated scattering （TIS） of the samples decreased firstly and then increased. These results indicated that TIS of the samples mainly depended on the surface roughness. According to the uncorrelated surface roughness scattering model, scattering properties of the samples were analyzed theoretically. The calculated TIS values based on this model agreed well with that obtained by TIS measurements.

关 键 词：氧化锆 表面粗糙度 标量散射 电子束蒸发 

分 类 号：O484.41[理学—固体物理]