南钢转炉厂连铸中间包水口堵塞原因分析  

ANALYSIS OF TROUGH WATER GAP JAM OF NANJING CONVERT MILL

作　　者：吕成洵[1] 李晶[1] 姚志超[2] 胡道峰 赵军 

机构地区：[1]北京科技大学,北京100083 [2]北京矿冶研究总院,北京100044 [3]南京钢铁公司,南京200035

出　　处：《矿冶》2006年第2期51-53,63,共4页Mining And Metallurgy

摘　　要：对中间包水口堵塞进行了分析,讨论了为减少水口堵塞和提高钢质量而采取的对策。将发生水口结瘤的水口沿横截面切开,取一段制成光片,在光学显微镜下观察其显微结构,利用扫描电镜确定不同物相的组成,据此研究分析水口结瘤的原因,并提出避免水口结瘤的措施。Water nozzle clogging of tundish is analyzed, and in order to reduce water nozzle clogging and improve the quality of steel, countermeasure is discussed. Cutting off the water nozzle cross-section of the heel, taking a sector and making a polished section, and observing its microstructure with optical microscope, determining the composition of different phase with scan electron microscope. According to the above, the cause of water nozzle clogging is researched, and the measure to avoid water slot heel is put forward.

关 键 词：水口堵塞 中间包 夹杂物 

分 类 号：TF703.54[冶金工程—钢铁冶金]