4Cr5MoSiV1热作模具钢等温淬火工艺的研究  

Research in Austempering Technology of Hot Work Die Steel 4Cr5MoSiV1

作　　者：刘平[1] 李谦[1] 吴磊[1] 黄金亮[1] 郑世安[1] 

机构地区：[1]洛阳工学院科技处,洛阳471039

出　　处：《金属热处理》1996年第2期14-16,共3页Heat Treatment of Metals

摘　　要：论述了不同等温淬火工艺对H13钢（4Cr5MoSiV1）组织和性能的影响。H13钢经250℃×10min等温淬火和回火后，得到具有优异强韧性配合的B下／M复相组织。与常规处理相比，在高温强度和塑性不降低的情况下，可使高温冲击韧度提高33．4％。管子钳活动甜头热锻模和哈夫模应用此工艺处理后，使用寿命可比原用3Cr2W8V钢提高1．5～6倍，具有明显的经济效益。In this paper, the effect of austempering technology on microstructure and properties of H13 steel is studied. Compared with formal treatment, as the B下/M duplex structure is obtained in H13 steel after 250℃ austempering and ternpering ; the high temperature impact ductility increases 33. 4 % without reduce of high temPerature strength and toughness. Using this technology on Hl3 hot work dies of pipe pliers and half die, the service life of dies can increase 1. 5~6 times than that of 3Cr2W8V steel dies.

关 键 词：H13钢 等温淬火 模具钢 淬火 

分 类 号：TG161.3[金属学及工艺—热处理]