LDPE/PS就地相容化研究  

Study on In-Situ Compatibilization of LDPE/PS Blends

作　　者：徐建平[1] 承民联[1] 丁永红[1] 谢赟[1] 

机构地区：[1]江苏工业学院材料科学与工程系,江苏常州213016

出　　处：《现代塑料加工应用》2006年第3期7-10,共4页Modern Plastics Processing and Applications

基　　金：江苏省自然科学基金资助项目(基金号BK2003028)

摘　　要：在熔融状态下,利用Friedel-crafts烷基化反应就地增容低密度聚乙烯(LDPE)/聚苯乙烯(PS)合金,考察了催化剂品种及其用量、温度、时间等对接枝反应及合金性能的影响。结果显示,无水三氯化铝为一有效催化剂,能实现大分子间的接枝反应,形成LDPE-g-PS,其用量增大时可使体系产生凝胶;升高温度、延长反应时间都不利于接枝百分比的提高;增容后的LDPE/PS合金,其性能得到显著改善。LDPE/PS melting blends was in-situ compatibilized by Friedel-crafts alkylation reaction. The effects of the kinds of Lewis acid, catalyst concentration, the temperature and the time of the melt mixing on the grafting ratio were examined. The results showed that AlCl3 was the most efficient catalyst. The grafting reaction of the large molecule could be incured and LDPE-g-PS was formed. Increasing the concentration of AlCl3 would cause the formation of gel. Increasing the temperature and the reaction time were not of benefit to increase graft ratio. The mechanical properties of the blends were improved.

关 键 词：聚乙烯 聚苯乙烯 相容性 熔融接枝 FRIEDEL-CRAFTS烷基化反应 

分 类 号：TQ325.12[化学工程—合成树脂塑料工业] TQ325.2