二氧化氯催化氧化处理活性艳红染料废水催化剂的制备与应用  

Preparation and application of catalysts for treatment of wastewater containing reactive brilliant red X-3B via catalytic oxidation by chlorine dioxide

作　　者：王承涛[1] 贺启环[1] 贺鹏[1] 

机构地区：[1]南京理工大学化工学院,江苏南京210094

出　　处：《工业催化》2006年第6期38-41,共4页Industrial Catalysis

基　　金：江苏省环境工程重点实验室开放基金资助课题(KF22003202)

摘　　要：研究了二氧化氯催化氧化用催化剂的制备条件与催化剂性能。实验结果表明,在工业催化剂载体上负载Cu2+活性组分的催化剂制备优化条件为:w(Cu2+)=6%,焙烧温度500℃,焙烧时间4 h。用此催化剂进行二氧化氯催化氧化处理COD为2 700 mg.L-1的活性艳红染料配制废水时,COD去除率达75%;催化剂寿命与再生实验表明,该方法在技术与经济上都具有较强实用性。The preparation and properties of the catalysts for chlorine dioxide （ClO22） catalytic oxidation were studied. Optimum preparation condition for supporting of Cu^2 ＋ active component was as follows： concentration of the impregnating solution 6% （w/w）, calcination at 500 ℃ for 4 h. COD removal efficiency of over 75 % was attained over the catalyst for treatment of wastewater with COD of 2 700 mg· L^-1. The catalyst service life and catalyst regeneration tests showed that ClO2 catalytic oxidation was a practical and efficient route for treatment of wastewater from dyestuff factory.

关 键 词：催化剂 二氧化氯 催化氧化 活性艳红染料 印染废水 

分 类 号：TQ426.94[化学工程] X704[环境科学与工程—环境工程]