电站热力系统的热经济学故障诊断  

Thermoeconomic approach to diagnosing malfunctions in a thermal power system

作　　者：张超[1] 陈胜[1] 刘黎明[1] 郑楚光[1] 

机构地区：[1]华中科技大学煤燃烧国家重点实验室,湖北武汉430074

出　　处：《华中科技大学学报（自然科学版）》2006年第6期99-102,共4页Journal of Huazhong University of Science and Technology(Natural Science Edition)

基　　金：国家重点基础研究发展计划资助项目(2004CB217700).

摘　　要：将基于热经济学结构理论和符号火用经济学的诊断方法应用于湖南某电厂300MW燃煤机组,利用热力学仿真研究了多个典型的热力设备故障,使用故障/障碍矩阵(或燃料影响表)定量地分析了这些故障对各设备不可逆增加和燃料消耗的影响,弥补了传统火用分析技术的不足.通过分析发现:a.某一组件不可逆的增加并不意味着该组件产生了故障,通常是由于其他组件故障在该组件诱导的障碍;b.某一组件的故障除了诱导其他组件产生障碍外,也会引起其他组件性能变化(产生诱导故障);c.该方法能有效缩小故障源的搜索范围,要辨识的真正故障原因必须分离诱导故障.The diagnostic technique based on the structure theory and symbolic thermoeconomics were applied to a 300MW pulverized coal fired power plant. Several typical malfunctions were analyzed by the thermodynamic simulation. The effects of these malfunctions on the irreversibility increase and fuel consumption in each component were quantitatively analyzed by so-called malfunction/dysfunction matrix （or fuel impact table）. This method made up the insufficiencies of the conventional exergy methods. The results showed that： a. The increase of irreversibility might not be caused by the component, but in most cases it was caused by the dysfunctions induced by other components. b. In addition to the dysfunctions induced in other components, an inefficiency in a component can modify the efficiencies in other components and generate induced malfunctions. c. This method can reduce the range of searching the origins of the malfunctions. The induced malfunctions should be separated in order to identify the real causes.

关 键 词：热经济学 结构理论 热经济学诊断 [火用]成本 

分 类 号：TK123[动力工程及工程热物理—工程热物理]