WRINKLE LIMIT BLANK HOLDER FORCE MODELS IN SQUARE-BOX DEEP DRAWING WITH VARIABLE SEGMENT BLANK-HOLDERS  

作　　者：LEI Kun ZHANG Kaifeng WANG Zhongqi 

机构地区：[1]School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001, China [2]Department of Mechanical Engineering,Northwestern Polytechnical University,Xi＇an 710027, China

出　　处：《Chinese Journal of Mechanical Engineering》2006年第2期205-211,共7页中国机械工程学报（英文版）

摘　　要：Constituting the reasonable control models of the wrinkle limit blank holder forces is the sticking point of the processes of the deep drawing with variable blank-holder forces, especially in the square-box forming. To begin with, a mode of segmenting flange of the square-box into eight zones is put forward according to the fact that the uniformity of flange deforming can be improved by control-ling segment blank-holders. Considering the integral influence of shear stress, a new concept, strain relaxation factor is defined. Hereby, the law of distribution of stress and stain in the deforming flange of square-box is achieved. Then based on these mechanical analysis models and the energy principle, the wrinkling flexivity functions of the straight flange and the circle flange are given, and the corresponding formulae of wrinkling limit blank-holder force in these two situations are also educed. In these processes, ply-anisotropy, strain hardening, thickness and friction are considered. In the end, a calculating example is designed to validate the rationality of the formulae of wrinkling limit blank-holder force, at the same time, the influences of the ply-anisotropy exponent and the strain hardening exponent on the wrinkle limit blank holder forces are also analyzed.Constituting the reasonable control models of the wrinkle limit blank holder forces is the sticking point of the processes of the deep drawing with variable blank-holder forces, especially in the square-box forming. To begin with, a mode of segmenting flange of the square-box into eight zones is put forward according to the fact that the uniformity of flange deforming can be improved by control-ling segment blank-holders. Considering the integral influence of shear stress, a new concept, strain relaxation factor is defined. Hereby, the law of distribution of stress and stain in the deforming flange of square-box is achieved. Then based on these mechanical analysis models and the energy principle, the wrinkling flexivity functions of the straight flange and the circle flange are given, and the corresponding formulae of wrinkling limit blank-holder force in these two situations are also educed. In these processes, ply-anisotropy, strain hardening, thickness and friction are considered. In the end, a calculating example is designed to validate the rationality of the formulae of wrinkling limit blank-holder force, at the same time, the influences of the ply-anisotropy exponent and the strain hardening exponent on the wrinkle limit blank holder forces are also analyzed.

关 键 词：Square-box Strain laxity factor Energy principle Wrinkle limit blank holder force Ply-anisotropy Strain hardening 

分 类 号：TH114[机械工程—机械设计及理论]