T/CJ13 tex清纱工艺参数的设定  

Enactment of T/CJ13 tex Clearing Processing Parameters

作　　者：张瑞红 

机构地区：[1]山西省晋华纺织有限责任公司

出　　处：《棉纺织技术》2006年第7期52-54,共3页Cotton Textile Technology

摘　　要：为充分发挥电子清纱器的清疵功能,提高筒纱质量,对LOEPFE FR-700型电子清纱器的工艺参数进行了三种方案的试验对比。通过对筒纱10万m纱疵情况进行统计对比,确定了优选的工艺参数:N通道D=5倍;Short通道L=1.0 cm,D=2.4倍;Long通道L=60 cm,D=1.4倍;L ine通道L=20 cm,D=-50%。指出:电子清纱器工艺参数的设定应综合考虑纱疵分级规定和后道工序的要求及生产效率来制定。To exert the clearing defects function of electronic clearer and enhance cheese quality, three plans comparison of processing parameters of LOEPFE FR-700 electronic clearer were done, through statistic and comparison of 100 thousand meter defects, optimized processing parameters were confirmed as follows, Passgage N D = 5, Short passage L = 1.0 cm,D =2.4,Long passage L =60 cm,D = 1.4, Line passage L =20 cm,D = -50%, The test shows that the enactment of processing parameters of electronic clearer should be according to the regularity of defects grade and the demands of back passage ＆ productive efficiency.

关 键 词：电子清纱器 纱疵 粗度 长度 工艺参数 

分 类 号：TS103.124[轻工技术与工程—纺织工程]