带材异步冷轧时大变形弹塑性有限元模拟和实验  

Elasto-Plastic Finite Element Simulation and Experiments of Asymmetrical Cold Rolling of Strip with Large Deformation

作　　者：朱有利[1] 龚永平[1] 康永林 

机构地区：[1]中国机械工程学会表面工程研究所,冶金部钢铁研究总院,北京科技大学

出　　处：《钢铁研究学报》1996年第5期22-25,共4页Journal of Iron and Steel Research

摘　　要：采用纠正的拉格朗日列式和基于弹塑性乘法分解的超弹性－塑性本构关系建立了大变形弹塑性有限元程序，并对铝带在不同条件下的异步冷轧过程进行数值模拟，同时对计算结果进行实验验证。结果表明，在异步轧制时，轧制压力对工作辊辊径的变化表现出非敏感性，而且变形区内静水压力绝对值比同步轧制时要小得多。An elasto-plastic finite element program for large deformation which incorporate updated Lagrangian formulation and elasto-plastic multiplicative decomposition based hyperelastic plastic constitutive relations has been developed.The program was then used to simulate asymmetrical cold rolling of Al strip under various rolling conditions, whereafter, the numerical predictions were verified through experiments. Results show that rolling forces exhibit insensitivity to work roll diameter variations in asymmetrical rolling. The absolute values of hydrostatic pressure within the deformation region are substantially lower compared with those under symmetrical rolling conditions.

关 键 词：冷轧 有限元法 弹塑性 异步冷轧 

分 类 号：TG335.12[金属学及工艺—金属压力加工]