CSP热轧板卷氧化皮结构  

Scale Structure of Coil Rolled by CSP Processing

作　　者：章华明[1] 车彦民[2] 陈其安[2] 朱涛[3] 贺子凯[1] 

机构地区：[1]昆明理工大学材料冶金工程学院,云南昆明650093 [2]钢铁研究总院结构材料研究所,北京100081 [3]马鞍山钢铁股份公司技术中心,安徽马鞍山243000

出　　处：《钢铁》2006年第6期67-70,共4页Iron and Steel

摘　　要：用SEM和XRD对CSP热轧板的单张板和冷卷的氧化皮进行了研究。结果表明,轧后冷却过程对氧化皮的组成有显著影响,单张板的氧化皮组成为:Fe2O3∶Fe3O4∶FeO为6.8∶33.4∶59.8;冷却后板卷的表面氧化皮是外层氧化铁层和内层Fe3O4层组成的双层结构,以Fe3O4为主,没有观察到FeO相,Fe2O3∶Fe3O4的比例为3.6∶96.4;该冷卷的结果显著区别于以往实验室研究的结果。计算得出单张板氧化皮密度为:5.49 g/cm3,冷卷的氧化皮密度为5.19 g/cm3,在整个板宽上,单张板氧化皮的组成基本一致,冷卷边部的Fe2O3稍多于1/4宽和中心位置。The scale structure of coil rolled by CSP was investigated with SEM and XRD. The scale composition is strongly influenced by cooling condition： the ratio Fe2O3 ： Fe3O4 ： FeO in scale of single sheet was 6.8 = 33.4 ： 59.8. However the scale on cold coils consisted mainly of magnetite, and was observed no FeO, the ratio Fe2O3： Fe3O4 was 3.6 ： 96.4, and the structure was essentially of two-layer structure with an outer hematite layer and inner magnetite layer, that was different from previous lab result. The scale density calculated of sheets and cold coils was 5.49 g/cm^3 and 5.19 g/cm^3 respectively. The scale structure of sheets across the width was identical essentially, but hematite content on edges was slightly more than that at quarter width and center.

关 键 词：CSP 氧化皮 组成 

分 类 号：TG335.11[金属学及工艺—金属压力加工]