济钢1750m^3高炉渣处理系统的工艺设计与改进  

Process Design and Improvem ent of Slag Disposal System for Jigang's 1750m^3 BF

作　　者：黄德立[1] 王建新[1] 富丽雁[1] 

机构地区：[1]济南钢铁集团总公司,山东济南250101

出　　处：《山东冶金》2006年第3期18-20,共3页Shandong Metallurgy

摘　　要：济钢1#1750m3高炉采用嘉恒法渣处理设备,生产中存在设备处理能力不足、水量不平衡及管道磨损等问题。济钢2#1750m3高炉的设计吸取了1#高炉的经验,增加了1台单体设备,形成两用一备的工作制度,增设1座大型平流沉淀池,并对管路系统进行了优化,解决了在1#高炉中存在的问题,运行良好。同时,对渣处理系统的水渣运输、蒸汽处理等遗留问题提出了改进建议。The slag disposal equipment of Jiabeng process is used for Jigang＇s 1^# 1750m^3 blast furnace. But there are installation capacity de- ficiency, the unbalance in water and the pipeline abrasion etc. Based on Jigang＇s 1^#1750m^3 blast furnace design, by adding one single equipment, forming the working regime of two-orpration and one standby, putting up one large horizontal flow sediment tank in the design of the slag disposal system for Jigang＇s 2^# 1750m^3 blast furnace and optimizing the pipeline system, all problems existed in the 1^# blast furnace are resolved and the system run all right. At the same time, the improvement suggestions for the slag transportation and steam treatment etc are put forward.

关 键 词：高炉 渣处理系统 嘉恒法 优化设计 

分 类 号：TF321.7[冶金工程—冶金机械及自动化]