透镜抛光机主轴转速与摆架摆速的匹配  

THE MATCH BETWEEN LENS POLISHER MAINSHAFT ROTATING SPEED AND THE SWING SPEED OF SWING FRAME

作　　者：冀春荣[1] 刘明远[1] 何钺[1] 

机构地区：[1]西安交通大学

出　　处：《应用光学》1996年第2期54-59,共6页Journal of Applied Optics

摘　　要：从计算得出的浮动上模作往复周期摆动时工件表面上任一点的相对线速度表达式看出，线速度幅值是一个多变量函数。在这些参数中，只有主轴转速与摆架摆速是机床本身的固有参数。从均匀抛光角度出发，提出主轴转速与摆架摆速匹配的观点，为抛光机换代设计提供了依据。From the expression of the relative linear velecity at any point on the surface of workpiece calculated when the floating upper die doing periodic reciprocating swing, it can be seen that the amplitude of the linear velocity is a multivariable function. Among such mang parameters,only the mainshaft rotating speed are swing span are the machine's own natural parameters.As viewed from uniform polishing, the viewpoint of match between the mainshaft rotating speed and the swing speed of the swing span is proposed, thus providing a basis for regeneration design of polisher.

关 键 词：抛光机 相对线速度 透镜加工 

分 类 号：TH74[机械工程—光学工程]