1m望远镜光电测光用滤光片接口改造  

The Reconstruction of Filter-shelf on 1m Telescope

作　　者：王雪利[1] 楼柯[1] 伦宝利[1] 

机构地区：[1]中国科学院国家天文台云南天文台,云南昆明650011

出　　处：《天文研究与技术》2006年第3期304-309,共6页Astronomical Research & Technology

摘　　要：云台1m RCC望远镜终端滤光片接口原设计为手动切换,因滤光片远离操作控制设备,使用很不方便。经改造现成为用单片机控制的程控系统,并可由主控计算机经RS232口远程控制。滤光片架改为直流电机驱动,由光电开关定位。系统已于2005年11月23日投入试用。本文给出了实现方法和接口基本数据格式。The interface of filter on 1 M Telescope of Yunnan Observatory was controled by the hand before. It was not convenient for use. Now a system controled by a micro process unit is reconstructed. The filter-shelf can also be eontroled by a remote computer through the interface of RS232. Filter-shelf is drived by a direct current motor and positioned by photoeleetrieity switch. The system has been operated from 23/11/2005.

关 键 词：单片机 滤光片架 程控 

分 类 号：P111[天文地球—天文学]