陶瓷粉末种类对聚氨酯复合材料冲蚀磨损性能的影响  

Effect of Different Ceramic Powder on the Erosive Wear Resistance of Polyurethane Composite

作　　者：李茂华[1] 栾道成[2] 丁武成[2] 张光业[1] 

机构地区：[1]湖南科技大学机电工程学院,湖南湘潭411201 [2]西华大学材料科学与工程学院,四川成都610039

出　　处：《润滑与密封》2006年第8期58-60,共3页Lubrication Engineering

基　　金：湖南科技大学硕士资金资助项目(E50442);国家自然科学基金重大项目(59895152);863高技术项目(863-715-005-0030);四川省应用基础研究资助项目(042287);四川省特种材料及制备技术重点实验室开发基金项目(Z01141)

摘　　要：用聚四氢呋喃醚二醇(PTMG)、甲苯二异氰酸酯(TD I)反应,与不同种类的陶瓷粉末进行共混,制得耐磨蚀聚氨酯复合材料。评价了聚氨酯陶瓷复合材料的耐磨性,通过扫描电镜观察了聚氨酯陶瓷复合材料的磨损形貌,探讨了陶瓷粉末增强聚氨酯弹性体的磨损机制。结果表明:当—NCO含量为6.35%,Si3N4粉末、TiN粉末质量分数为10%时,耐磨性能最好,分别提高纯聚氨酯弹性体抗冲蚀磨损性能1.88倍和2.81倍。Polyurethane ceramic composite materials were synthesized from polytetrahydrofuran, toluene diisocyanate and ceramic powders, and their erosion wear resistance was valued. The wear mechanisms of composites were discussed through examining and analyzing the worn surfaces with a scanning electron microscope. Results show that composite can be strengthened when Si3N4 ceramic powders weight percentage is 10% ,erosion wear resistance of which is almost 2 times of polyurethane. Erosion wear resistance of polyurethane TiN ceramic composite materials is 2. 81 times of polyurethane.

关 键 词：聚氨酯 陶瓷粉末 复合材料 冲蚀磨损 

分 类 号：TH117.1[机械工程—机械设计及理论]