聚合物驱含油污水絮凝剂筛选  

Selection of Flocculant for Polymer Flooding Oil Wastewater

作　　者：李绍文[1] 吴卫霞[2] 汪小宇[3] 

机构地区：[1]胜利油田有限公司河口采油厂,山东东营257200 [2]吐哈油田,新疆哈密838202 [3]长江大学化学与环境工程学院,湖北荆州434023

出　　处：《断块油气田》2006年第4期79-80,共2页Fault-Block Oil & Gas Field

摘　　要：针对大庆油田聚合物驱含油污水,选取几种絮凝剂评价其污水处理效果,并将优选到的无机絮凝剂与有机絮凝剂进行复配。结果表明,当有机絮凝剂PAM-1与无机絮凝剂JO-1复配使用时,其除油、去浊率显著提高,分别达到95.4%和82.7%,CODcr去除率也达到83.2%以上。Several types of flocculant were selected to evaluate the disposal result for the polymer flooding oil wastewater in Daqing Oilfield.The optimized organic flocculant and inorganic flocculant were combined once again.The results showed that the selected organic flocculant PAM-1 combined with inorganic flocculant JO-1 had remarkably increased removal efficiency of oil and turbidity,which is respectively 95.4% and 82.7%.The removal efficiency of CODcr is over 83.2%.

关 键 词：含油污水 聚合物驱 絮凝剂 筛选 

分 类 号：TQ314.253[化学工程—高聚物工业] X740.3[环境科学与工程—环境工程]