单级G-M型脉管制冷机回热器性能  

Performance study on regenerator of G-M type single stage pulse tube cooler

作　　者：唐立[1] 邱利民[1] 何永林[1] 甘智华[1] 

机构地区：[1]浙江大学制冷与低温研究所,杭州310027

出　　处：《低温工程》2006年第4期1-4,共4页Cryogenics

基　　金：国家自然科学基金重点项目(50536040);浙江省科技厅国际合作重点项目(2006C24G2010027)

摘　　要：为了能进一步提高单级G-M型脉管制冷机的性能,着重对80 K到300 K温区回热器的效率进行了理论和试验研究。通过对不锈钢和磷青铜丝网材料热渗透深度和热导率的分析,指出在这一温区采用不锈钢丝网的制冷性能优于磷青铜丝网。基于REGEN3.2进行的数值模拟,进一步指出适当增大不锈钢丝网目数有利于提高制冷性能,并由此指导实验取得了理想的结果。单级G-M型脉管制冷机经优化后,取得了11.1 K的最低制冷温度,是当前国内外报道的最好结果;同时该制冷机在20 K和30 K分别可获得17.8 W和40.7 W的制冷量。For further improvement of performance of single stage G-M type pulse tube cooler （ PTC ）, the experiment and theory study was focused on the efficiency of regenerator at 80 K-300 K. Through analysis of heat penetration depth and thermal conductivity between stainless steel and phosphor bronze, the result shows that stainless steel screens have better refrigeration performance than phosphor bronze ones. Based on numerical simulation with REGEN3.2, the result also shows that proper increase of mesh number can be beneficial to refrigeration performance. After parameters of single stage G-M type PTC were optimized, a new refrigeration temperature record of 11.1 K was achieved. Meanwhile, the cooler had refrigera- tion power of 17.8 W at 20 K and 40.7 W at 30 K.

关 键 词：脉管 回热器 制冷效率 

分 类 号：TB663[一般工业技术—制冷工程] TB651