检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:马海鹏[1] 张华民[1] 胡军[1] 才英华[1] 衣宝廉[1]
机构地区:[1]中国科学院大连化学物理研究所
出 处:《电池》2006年第4期249-251,共3页Battery Bimonthly
基 金:国家自然科学基金重点资助项目(No.50236010);国家重点基础研究发展规划项目(No.G2000026410);辽宁省科学技术基金
摘 要:采用可视化方法研究了直条单流道质子交换膜燃料电池(PEMFC)阴极排水过程。通过分析流道首次液态排水时间和平均液态排水间隔时间的变化,研究了电流密度、增湿温度和气体流速等对阴极排水过程的影响。阴极气体非饱和增湿时,生成水以水蒸气和液态水两种方式排出,水蒸气排水为连续过程,液态排水为间歇过程。随着电流密度和相对湿度的提高,液态水的积累速度增加;随着气体流速的增大,生成的水以水蒸气方式排出的比例增大。Water discharging in the cathode of PEMFC with single straight flow channel was studied by visualization method. The first and average liquid state water discharging time between adjacent water discharging was introduced to investigate the effects of current density, humidified temperature and gas flow rate on the water discharging in the cathode. When the cathode gas was unsaturated, water was discharged by means of vapor and liquid state water discharging. Vapor state water discharging was continuous, while liquid state water discharging was intermittent. The accumulation rate of liquid state water increased with the increasing of the current density and relative humidity and more water was blown out as vapor state with the increasing of gas flow rate.
关 键 词:质子交换膜燃料电池(PEMFC) 可视化 排水
分 类 号:TM911.4[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222