Al-Cu合金中PLC剪切带成核过程三维变形的实验研究  

EXPERIMENTAL INVESTIGATION ON THE 3D DEFORMATION OF THE NUCLEATION PROCESS OF PLC SHEARING BAND IN A1-Cu ALLOY

作　　者：刘颢文[1] 张青川[1] 卢俊勇[1] 项国富[1] 伍小平[1] 

机构地区：[1]中国科学技术大学中国科学院材料力学行为和设计重点实验室,合肥230027

出　　处：《金属学报》2006年第9期925-930,共6页Acta Metallurgica Sinica

基　　金：国家自然科学基金项目10232030和10372098资助

摘　　要：利用高速(1000Hz)数字摄像系统．对Al-Cu合金拉伸试件中跳跃式不连续传播的B类型PLC带的瞬态成核与演化过程进行连续捕捉．运用数字散斑干涉法(DSPI,digital speckle pattern interferometry)得到PLC带成核和传播过程中由试件面内和离面位移条纹图表现的B类型带的成核和传播的三维变形过程．实验结果显示了B类型PLC带的一种演化形式,即带首先在试件的一侧成核产生并沿厚度方向发生剪切变形,在观察平面上形成沿与拉伸轴方向呈53°角的窄带．随着应力下落,带的前沿开始向试件的另一侧面沿自身长度方向传播,在传播过程中带逐渐沿自身宽度方向膨胀．带的前沿贯穿试件后,带开始高速膨胀,导致雪崩式剪切变形发生．根据离面位移结果得到相邻发生的B型带之间的跳跃传播间距,即在带的传播方向上,后一条带产生在前一条的前沿,跳跃式传播过程中相邻两条带的中心线间距为带宽的一半．The 3D deformation process of type-B PLC shearing band in Al-Cu alloy is captured by the help of a high speed digital photography with 1000 frames per second. A technique based on a novel high-speed digital speckle pattern metrology consisting of in-plane and out-of-plane deformation measurement methods is used for obtaining the playback of the 3D deformation process. The result shows one of the nucleation methods of type-B band： the shearing band initiates at a lateral specimen surface as a narrow band at an angle of 53° to the tensile axils and shears along the thickness direction. Subsequently the band front begins to propagate to the other lateral specimen surface along its length direction and expands in its width direction accompanying with the drop of the stress. When the front of the band reaches the other lateral surface, the band begins to expand in its width direction instantly and avalanchine shearing deformation happens. Based on the out-of-plane data, the relationship to the nucleation positions of following bands is that the latter one initiates on the front edge of the former one and the spacing of their center lines is half of the band width.

关 键 词：AL-CU合金 PLC剪切带 数字散斑干涉法 离面位移 成核 

分 类 号：O348.1[理学—固体力学] O483[理学—力学]