连铸结晶器中渣膜的传热研究  

The Study on Heat Transfer Through Flux Film in the Continuous Casting Mold

作　　者：张平[1] 魏庆成[1] 胡建军 

机构地区：[1]重庆大学冶金及材料工程系

出　　处：《重庆大学学报（自然科学版）》1996年第4期77-81,共5页Journal of Chongqing University

基　　金：国家自然科学基金

摘　　要：用自制的一台模拟试验装置研究了连铸结晶器中渣膜的热传导行为。测定了结晶器与凝固坯壳之间渣膜的有效导热系数及界面的接触热阻：高温下渣膜的有效导热系数大致为４～５Ｗ·ｍ－１·Ｋ－１，结晶器与渣膜层界面问存在的热阻相当于９４～１４９μｍ的空气间隙。A simulated appartus is designed for measuring the heat transfer through the layer of continuouns casting flux between the mold and the solidified shell,and it is used to study the heat transfer behavior of flux film in the continuous casting mold. The effective thermal conductivity coefficient of flux film between the mold and the flux film,and the contact thermal resistance of the interface of flux film have been measured,and the flux film's effective thermal condutivity coefficient has been calculated to be about 4～5W·m-1·K-1,an interfacial thermal resistance corresponding to the air gap with width of 94～149μm is observed.

关 键 词：连铸 结晶器 渣膜 传热 

分 类 号：TF777[冶金工程—钢铁冶金]