正交试验法在抽油机井管杆偏磨失效分析中的应用  

Application of orthogonal test method in off-center wearing failure analysis on well tube and rod of oil sucker

作　　者：周平[1] 

机构地区：[1]黑龙江科技学院机械工程学院,黑龙江哈尔滨150027

出　　处：《机械设计》2006年第10期14-17,共4页Journal of Machine Design

基　　金：中国石油天然气总公司质量安全与环保部科技攻关项目(CNPC2001-02)

摘　　要：采用正交试验法揭示了影响水驱抽油机井管杆偏磨的主要人为控制因素对检泵周期影响的规律性,从中找出各因素对检泵周期影响的主次关系,并确定出最优的工艺条件组合。运用方差分析理论处理试验结果,得出各因素对管杆偏磨井检泵周期影响的显著程度,从而发现最薄弱环节,为科学治理和有效控制管杆偏磨失效,降低水驱抽油机井检泵率提供合理依据。By adopting the orthogonal test method the influencing regularity was revealed on the checking period of pump affected by mainly the man-made controlling factors that effect the off-center wearing on well tube and rod of water driven oil sucker. The primary and secondary relationships on the influence of pump checking period affected by each factor was found from this regularity, and the optimum combination of technological conditions was determined. Utilizing the theory of variance analysis to deal with the result of test. The remarkable extent of influences on the off-center wearing of tube and rod and checking period of pump affected by each factor was obtained, thus the weakest link was found and thereby provided reasonable basis for put in order scientifically and control effectively the off-center wearing failure of tube and rod and the reduction of pump checking rate of water driven oil sucker.

关 键 词：正交试验法 方差分析 管杆偏磨 失效分析 检泵周期 

分 类 号：TE933[石油与天然气工程—石油机械设备]